Been using some of the scrap ends of O1 ive kept from other knives to make some Free hand 2 and 3 finger sketeton necker/ pack blades.
Also uses little bits of Kydex offcuts that are to small for anything else
I could have used the cheaper small rivets but stuck to the 1/4" ones at 1.5" centers so it can be fitted to std spaced kit like Teklocs and belt loops etc
All blades are or will be Flandi ground giving a nice sharp slicy but solid feel
any body have an opinion on these type of blades
the 3 made up are 4mm the rest are a mix of 3mm 4mm and 3/16" (4.75mm)
Also uses little bits of Kydex offcuts that are to small for anything else
I could have used the cheaper small rivets but stuck to the 1/4" ones at 1.5" centers so it can be fitted to std spaced kit like Teklocs and belt loops etc
All blades are or will be Flandi ground giving a nice sharp slicy but solid feel
any body have an opinion on these type of blades
the 3 made up are 4mm the rest are a mix of 3mm 4mm and 3/16" (4.75mm)