So it all started with an idea, after 1 month of hard work it is done , here are some specs
Hand forged
80CRV2 Finnish Krupp high carbon steel
Zero degree scandi grind
59-60HRC hardness
Gaboon Ebony handle
Brass pins , tube and 0.5mm spacers
Covered with 5 coats of boiled linseed oil
Tapered tang
21cm from bottom to tip , 10cm recurve blade , 3,2mm thick
Best quality Polish veg tan leather sheath with basket weave decorations, burnished and covered with natural beeswax
I also think about making a matching huge ferro rod if the buyer will want one
Your honest opinion is more than welcome , just consider that it was all hand made , all made with files even the bevel , only power tool used was a drill to make holes
Hand forged
80CRV2 Finnish Krupp high carbon steel
Zero degree scandi grind
59-60HRC hardness
Gaboon Ebony handle
Brass pins , tube and 0.5mm spacers
Covered with 5 coats of boiled linseed oil
Tapered tang
21cm from bottom to tip , 10cm recurve blade , 3,2mm thick
Best quality Polish veg tan leather sheath with basket weave decorations, burnished and covered with natural beeswax
I also think about making a matching huge ferro rod if the buyer will want one
Your honest opinion is more than welcome , just consider that it was all hand made , all made with files even the bevel , only power tool used was a drill to make holes
![66ae3addb46d.jpg](https://a.radikal.ru/a07/1808/bd/66ae3addb46d.jpg)
![394fe75e19e8.jpg](https://b.radikal.ru/b34/1808/25/394fe75e19e8.jpg)
![439634ceb9cc.jpg](https://a.radikal.ru/a36/1808/7f/439634ceb9cc.jpg)
![676c928c35b8.jpg](https://b.radikal.ru/b04/1808/b9/676c928c35b8.jpg)
![c32ac1e684e3.jpg](https://d.radikal.ru/d29/1808/36/c32ac1e684e3.jpg)
![cd0d0f70508e.jpg](https://c.radikal.ru/c28/1808/a5/cd0d0f70508e.jpg)
![89ad393d98e1.jpg](https://c.radikal.ru/c42/1808/2f/89ad393d98e1.jpg)