Login

Partners

Bushcraft Ventures 
Bushcraft Expeditions 
Dryad Bushcraft 
Greenman Bushcraft 
Wildside Survival 
Woodcraft School 
Woodsmoke 
 
The Egyptian Bow Drill Print E-mail
Written by Dick Baugh   
As soon as I think I know all there is to know abut a subject something happens which reminds me that I should never boast about my all-encompassing knowledge.

efire1.jpg

In February I was teaching people the secrets of making fire by friction at the 2001Winter Count when John Olsen strode up and showed me a cute little friction fire set. It completely eliminated a couple of the problems inherent in teaching the bow drill friction fire method.

efire2.jpg

efire3.jpg

John said he saw the original in a book about ancient Egypt.
Many novices are plagued by two problems when they try to start a fire with a bow drill. First, the cord isn't wrapped tightly enough around the spindle so the cord slips, the spindle stops spinning, increased rubbing weakens the cord away and I loose my patience and start yelling at the student. Bad pedagogy. Adding injury to insult, the spindle then slides out of the socket and propelled by the increasing tension in the string, flies through the air and pokes someone in the eye. Whoooaaa!

efire4.jpg

Leave it to the ancient Egyptians. They placed an extra long cord on the bow and either tied the middle of the cord around the spindle or passed the cord through a hole drilled in the middle of the spindle. Next, they wrapped the extra length of cord around the spindle. Now slippage of the cord is impossible and the spindle can't flip into someone's eye.
This non-slip connection between the cord and spindle may also allow the use of a thinner, weaker cord.



Thank you to Dick Baugh at www.primitiveways.co for supplying this article
Comments (0)add
You must be logged in to a comment. Please register if you do not have an account yet.

busy
 

Latest Articles

Summer Bushmoot 2008 (02.06.2008)
thumb_bushmoot20071.jpgBushMoot, the best event of the year - from 1st -5th August 2008 at Merthyr Mawr in South Wales. 

The Moot is now Full

Tickets for the full event have sold out, sorry if you've missed the opportunity but there will be plenty more Moots in the future.  We want it to be a great experience for everyone which means keeping the numbers limited.

Day visitors are more than welcome but we're no longer taking bookings through the shop so you'll have to sign in and pay at the event.  The day rate for the event is £20 payable at reception - Camping spaces are no longer available.

Fish Trap (01.04.2008)
thumb_fishtrap9.jpgI used Hazel wood. Choose the thin long shoots of wood which i would think are a couple of years old. If you don't catch anything at first don't worry. It may just be a case of changing a few things.
Birch Tar - How to collect it (23.02.2008)
thumb_tar13.jpg Most bushcrafters know that Birch bark is fantastic for fire lighting because of all the oil concealed within it. This tutorial guides you through the process of extracting that tar from the bark.
Wild Wine (Part 8) (28.11.2007)
thumb_wildwine6.jpgNow we could bung a label on (which should always say they type of wine and when it was bottled). I suggest you cross-reference to a book of recipes and notes so that when you get a cracking wine you can recreate it. We are going to add a little something to the presentation of the wine by putting a foil cap over the neck. First we drop a foil cap (available for a couple of pence from a wine shop) over the bottle neck.
Wild Wine (Part 7) (26.11.2007)
thumb_wildwine1.jpgRight, we now have clean, fined and filtered wine. We pour it into clean (yes and sterilised) bottles with a funnel. We need to cork it. Its possible to put corks in with a mallet. I use a corking gun and waxed corks that do not need to be soaked (plain corks do)
Wild Wine )Part 6) (23.11.2007)
thumb_wildwine1.jpgWell, the finings have worked – the wine is beautifully clear.

Most Popular Articles

Paracord Bracelet Tutorial (23.04.2007)
thumb_paracordbracelet16.jpgAs soon as I'd finished my Paracord Bracelet, I'd decided to write a tutorial on making one. A good thing considering the majority of the responses since I posted it were asking me how to do it! Here goes.. You will need approximately 3 metres of paracord with the ends already sealed/melted, and something to make a temporary knot - a twist tie or piece of string should suffice.
Tarps - Benefits and Basic Instructions (16.07.2007)

thumb_tarp1.jpgWhy a Tarp? In my quest to lighten my backpack I considered and, at first, rejected the use of a tarp instead of a tent. I liked the idea of a tarp, after all there are great advantages like....

Bannock (05.04.2007)
thumb_bannock1.jpg There was a period in my life where I lived out of a pack for months at a time and this was one of my staples. I like to coil it like a rope on a stick and bake it over hot coals...
How to Sharpen an Axe (09.07.2007)
thumb_axesharpening21.jpgI have been asked a number of times recently to provide some advice of guidance on the best way to sharpen an axe. Whilst I am always happy to provide input, I thought that it might be worthwhile to put together a tutorial on the basic techniques. The techniques used in here are intended to provide not only a sharp axe but also a safe and efficient axe.
Berry Picker (23.04.2007)
thumb_berrypicker10.jpgThere are many different ways you can make a berry picker but this is just a design i came up with which uses a packet of kebab skiewers and some discs of wood.
Fire By Friction - Using a fire-kit made with stone tools (31.05.2007)
thumb_firefrictionwhitcombe2.jpgThe whole kit took less than three hours to finally pull together — though that really overlooks by far the most time-consuming aspect, the preparation of materials. In fact, preparation has two components, actually. The first is the selection of materials. The second is the actual preparation.