Login

Partners

Bushcraft Ventures 
Bushcraft Expeditions 
Dryad Bushcraft 
Greenman Bushcraft 
Wildside Survival 
Woodcraft School 
Woodsmoke 
 
Comb - Tutorial Print E-mail
Written by jon r   
Article Index
Comb - Tutorial
Page 2
Split a slither of wood off a block. The grain in my comb runs vertically so that the teeth have much strength. I chose to use Ash wood because it is quite strong, when the wood seasons it will become harder and stronger.

comb1.jpg 
comb2.jpg
I used this knife to do all the carving on the comb, Its my Grandads old farming knife. It has a few different sized knives and a tool for making wholes in leather which i find is also good at making wholes in thin wood. 
comb3.jpg
Carve the sides of the split wood smooth ans straight.
comb4.jpg
I also rounded the top two corners.
comb5.jpg
I drew a straight line across the wood to show me where the base of the teeth should start. I then made a small whole in the centre with the whole boaring tool (you could simply use the tip of your knife or just try carving without these wholes)


 

Latest Articles

Summer Bushmoot 2008 (02.06.2008)
thumb_bushmoot20071.jpgBushMoot, the best event of the year - from 1st -5th August 2008 at Merthyr Mawr in South Wales. 

The Moot is now Full

Tickets for the full event have sold out, sorry if you've missed the opportunity but there will be plenty more Moots in the future.  We want it to be a great experience for everyone which means keeping the numbers limited.

Day visitors are more than welcome but we're no longer taking bookings through the shop so you'll have to sign in and pay at the event.  The day rate for the event is £20 payable at reception - Camping spaces are no longer available.

Fish Trap (01.04.2008)
thumb_fishtrap9.jpgI used Hazel wood. Choose the thin long shoots of wood which i would think are a couple of years old. If you don't catch anything at first don't worry. It may just be a case of changing a few things.
Birch Tar - How to collect it (23.02.2008)
thumb_tar13.jpg Most bushcrafters know that Birch bark is fantastic for fire lighting because of all the oil concealed within it. This tutorial guides you through the process of extracting that tar from the bark.
Wild Wine (Part 8) (28.11.2007)
thumb_wildwine6.jpgNow we could bung a label on (which should always say they type of wine and when it was bottled). I suggest you cross-reference to a book of recipes and notes so that when you get a cracking wine you can recreate it. We are going to add a little something to the presentation of the wine by putting a foil cap over the neck. First we drop a foil cap (available for a couple of pence from a wine shop) over the bottle neck.
Wild Wine (Part 7) (26.11.2007)
thumb_wildwine1.jpgRight, we now have clean, fined and filtered wine. We pour it into clean (yes and sterilised) bottles with a funnel. We need to cork it. Its possible to put corks in with a mallet. I use a corking gun and waxed corks that do not need to be soaked (plain corks do)
Wild Wine )Part 6) (23.11.2007)
thumb_wildwine1.jpgWell, the finings have worked – the wine is beautifully clear.

Most Popular Articles

Paracord Bracelet Tutorial (23.04.2007)
thumb_paracordbracelet16.jpgAs soon as I'd finished my Paracord Bracelet, I'd decided to write a tutorial on making one. A good thing considering the majority of the responses since I posted it were asking me how to do it! Here goes.. You will need approximately 3 metres of paracord with the ends already sealed/melted, and something to make a temporary knot - a twist tie or piece of string should suffice.
Tarps - Benefits and Basic Instructions (16.07.2007)

thumb_tarp1.jpgWhy a Tarp? In my quest to lighten my backpack I considered and, at first, rejected the use of a tarp instead of a tent. I liked the idea of a tarp, after all there are great advantages like....

How to Sharpen an Axe (09.07.2007)
thumb_axesharpening21.jpgI have been asked a number of times recently to provide some advice of guidance on the best way to sharpen an axe. Whilst I am always happy to provide input, I thought that it might be worthwhile to put together a tutorial on the basic techniques. The techniques used in here are intended to provide not only a sharp axe but also a safe and efficient axe.
Bannock (05.04.2007)
thumb_bannock1.jpg There was a period in my life where I lived out of a pack for months at a time and this was one of my staples. I like to coil it like a rope on a stick and bake it over hot coals...
Berry Picker (23.04.2007)
thumb_berrypicker10.jpgThere are many different ways you can make a berry picker but this is just a design i came up with which uses a packet of kebab skiewers and some discs of wood.
Fire By Friction - Using a fire-kit made with stone tools (31.05.2007)
thumb_firefrictionwhitcombe2.jpgThe whole kit took less than three hours to finally pull together — though that really overlooks by far the most time-consuming aspect, the preparation of materials. In fact, preparation has two components, actually. The first is the selection of materials. The second is the actual preparation.