Login

Partners

Bushcraft Ventures 
Bushcraft Expeditions 
Greenman Bushcraft 
Wildside Survival 
Woodcraft School 
Woodsmoke 
 
Fjallraven: Vintage 20 Print E-mail
Written by John Fenna   

 

 FJALLRAVEN: VINTAGE 20

Fjallraven have quite a following within the bushcraft community, being admired by many for their tough, comfortable and practical clothing and equipment.

 vintage20s.jpg

 

The Fjallraven Vintage 20 is a daysack which combines “traditional” vintage styling with some modern technology and design to give a lightweight, comfortable and practical piece of kit that should appeal to many bushcrafters.

This single compartment sack has two side pockets and a shaped lid and seems generously sized for its 20 litre capacity designation.

The main body of the Vintage 20, the lid and side pockets are made from Fjallraven’s famous impregnated 65/35% polycotton G1000, which is light but tough, while the base of the sack is made from tougher, more water resistant fabric which is (I believe) a PVC coated nylon.  The top of the sack has a drawcord closure with a locking toggle and a ripstop nylon snow lock, again with a locking toggle drawstring closure.  Inside the bag you find a nylon lining on the back panel and this incorporates a shaped nylon water bottle/flask pocket with, again, a drawstring closure with a locking toggle.

The side pockets, which will easily accommodate such items as a Jetboil stove or Crusader mess tins with room to spare, have shaped lids with leather strap and white metal buckles for a practical, but “traditional” vintage look.

The lid of the Vintage 20 is also shaped and has leather strap and metal buckle closures and, on the inner face is lined with nylon, which forms a useful zip-closed pocket.

 

vintage20backs.jpg

 

The harness has a haul loop, 2 padded G1000 covered shaped shoulder straps with webbing straps (which look like cotton webbing but seem to be matt polypropylene) with white metal buckles and eyelet for size adjustment and weight spreading “fin” attachments at the base of the sack.

The fully adjustable waist strap, however, has a plastic quick release buckle, as does the fully adjustable chest strap.

 

 

 

 

 vintage20backpanels.jpg

 

The sack has a very useful air-gap maintaining “air vent” back panel comprising a sprung metal frame kept in a curve, a mesh “body contact” section and a padded lower edge.  This ventilating panel keeps the body of the sack away from your body to stop you getting too much of a sweaty back in warm weather without losing the stability you get from full contact with your pack.

For use of the Vintage 20 in colder weather (when you want a warm back!) or when you just want a “soft” pack, the sprung panel is removable.

 Although the G1000 is a fabric used for Fjallraven’s clothing range, it is surprisingly tough and stands up to wear even when used as a daysack fabric.  The Vintage 20 looks very smart, is very well made with bound main seams and edges and is a pleasing blend of vintage and modern looks.  The Vintage 20 is very comfortable and quiet in use, holds more than you think, and is pretty tough for a lightweight daysack, though I would be careful not to overload it with heavy sharp-edged items.  It is a lightweight fabric after all, weighing only about 850gm.

Available in Light Khaki or Olive, the attractive and practical Fjallraven Vintage 20 Daysack costs around £65.
The G-1000 fabric is machine washable at a 40 degree wash and can be re-proofed with Fjallravens own “Bees wax”, which can be purchased in blocks (soap size). To re-proof, just rub the wax all over the garment, and gently heat by either hair-dryer, or gently over an open fire.

 

I would highly recomend this daysack

 

For more information check out www.fjallraven.com

 

Comments (1)add
...
written by Mikey P , April 19, 2008
I really like the Fjallraven kit: I have the Greenland trousers, one of their hats and a Montt jacket. They are really well made and I rate them highly. I was a little concerned when you described the concave back support: if you have a larger pack with this system, you only really have about 3 points of contact on the back and hips which, even though it helps keep your back dryer, over distance, starts to hurt! However, it looks like Fjallraven have done this right as they have kept the weight/size of the pack down. Nice-looking piece of kit. You must be really chuffed.
You must be logged in to a comment. Please register if you do not have an account yet.

busy
 

Latest Reviews

Caldera Cone - Initial Review (09.06.2008)

caldera_cone_-_initial_-_boiling.jpgI've been playing around with various Pepsi can stoves for a while now and was intrigued when I saw how many reviews this little stove was getting, light and efficient what more could you want???

Tilley T3 Hat (04.06.2008)
tilley3.jpgHow many hats are guaranteed for life with a no quibble agreement?  The T3 is!  How many manufacturers insure the hat against loss or damage?  The T3 has a 2-year, all perils 50% deductible policy attached!
Gerber Multitool (02.06.2008)
gerbertool4.jpgThe jungle is a harsh environment for such an item because the tool was wet or the majority of the time. However, it stood up very well with little sign of rusting or corrosion even after coming back and allowing it to stand for a while.
Byrd Wrench (29.05.2008)
byrdwrench7.jpgUnique in its field, the Wrench is not based on the standard pliers set-up like every other model on the market but on a sliding adjustable pliers design
Snugpak Rocketpak (08.05.2008)

The rucksack is designed to be worn over military belt pouches, which means it rides high on the back. The belt is in actually fact a waist belt rather than a hip belt and fits around the waist.

Karrimor Dry bag (06.05.2008)

Thankfully we didn’t need to test this theory! The dry bag sat nicely in the bottom of the rucksacks and, as there are no valves or anything complicated to remember...

Most Popular Reviews

Fallkniven F1 knife (05.04.2007)
thumb_f11.JPG The F1 is a basic fixed blade knife with a 'drop-point' 3.5inch blade (made of VG 10 stainless steel) and a man-made (Thermorun) handle. Originally designed for use by Aircrew of the Swedish Defence Forces as a survival knife, as any survivor will tell you a 'survival-knife' is the one you have with you at the time, so the F1 is designed to be small & light enough to be carried at all times but robust enough to withstand the abuse it would encounter in a survival situation within the Arctic Circle...
Bushman UK Knives (23.03.2007)
thumb_bushman_pair_1.jpgI rate these knifes very highly. Both in design and construction
Maxpedition Jumbo Versipack Review (03.07.2007)
thumb_Overview Bag.JPGI was intrigued by Spamel’s thread on the Snugpak Response Pak – or their other types of ‘grab-n-go’ bags - and what people carried in them. I’m a bit of a bag junkie, partly because of my work (military) and partly because of a quest to be able to carry the right equipment for the right job in practically any situation.  I guess the ‘Holy Grail’ is effectively a bag that you instinctively grab, without thinking about it, before you go off for an adventure.
Karrimor Sabre 45 Rucksack (12.12.2007)

thumb_saber45front.jpg

Sabre 45 is probably the rucksack that others are marked against in the bushcraft market. I was very interested to see what all the hype was about and if the real thing lived up to it all!

Fire Steel (23.03.2007)
thumb_steelmain.jpgThe sparks that come off the steel, burn longer and hotter than anything I have used before. Sometimes they can sizzle away at 3000 degrees centigrade for a second or more,
BCB Crusader Mess TIn with Lid (05.07.2007)
thumb_crusadermesstin1.jpgThe mess tin is a solid stainless steel and relatively lightweight cooking vessel. It comes with a well fitting lid, which is a bonus compared with the old aluminium version which came without a lid. It saves precious fuel and makes your water (or whatever you are preparing in it) come to a boil significantly faster.