Swedish Snow Smock

[andybysea]

Ive got a few both button full front and the smock type i find the smock type smaller than the button front ones,the three smock ones i have two are same size one defo smaller,though i find all of them a bit snug on the shoulders if i have a few light layers underneath.

[swotty]

What would people recommend, the smock type or the full button type?

[andybysea]

I used to prefer the smock type, but recently i have swayed over to full button, reasons, the smock type heavier material,tighter fit(well to me) harder to get on and off,feels more restrictive, were as the full button(bit of pain to remove all buttons when your modding) but after is lighter material but still tough,more comfy, same size pockets/hood,packs smaller,still was wind proof all my personnel opinions. oh and i only open a couple of buttons and pull it over my head,but its does seem to come on and off easier probably down to fabric weight.

[Dreadhead]

just finished (mostly) pimping my smock. dyed, cut down to size, added full buttons of antler, and added reindeer leather trim and cuffs.


By wanderingpict at 2012-07-01

By wanderingpict at 2012-07-01

By wanderingpict at 2012-07-01
By wanderingpict at 2012-07-01

By wanderingpict at 2012-07-01

By wanderingpict at 2012-07-01

By wanderingpict at 2012-07-01

By wanderingpict at 2012-07-01

[Simon1]

Cool smock!!!

[Dreadhead]

cheers Simon

[kato]

Great job on the smock dreadhead
I have a couple of these smocks I've dyed one burgundy and added leather cord and toggles to the hood.
I wonder if they will wax well?

[andybysea]

Great mod's Dreadhead, here was me moaning about changing the button's,that's some sewing youve done! Kato ive waxed a few of mine with the Fjallhaven wax block,takes ok but does stiffen then up some what.

[Dreadhead]

cheers guys im lovin it. i reckon ill end up going for the fjallraven greenland wax too at somepoint however its holding up in the rain just fine so far so a couple of weeks of testing before i wax it so i can see the difference

[jwillis]

Mine came without a draw cord in the waist, how would i go about adding one.

thanks

[Dreadhead]

i could send you the drawcord that came with mine if you like. and then all you would have to do is take a long peice of material say 2 inches wide and sew it around the inside or outside however you want to do it so it creates a long pocket/sleeve. leave two openings at the front and thread the cord through should be a simple job. let me know if you want the proper drawcord

[martsim73]

I know this was posted a long time ago Pignut, but is there any chance you could take a quick photo of the extended cuffs as this is a mod I need to do but don't know how/where to start. Although I ordered a xl sized smock I find the arms a little short and the cuffs ridiculously tight.

Many thanks.... A great thread!

Martin

[forestwalker]

Nice work Dreadhead! I have two of the smock style ones, pretty much brand new. One is sized "medium troll", and while the sleeves are long enought to fit a gibbon the cuffs are tight. My plan is to simply cut the sleeves down to non-simian proportions and add tabs, almost certainly button. And then add a front chest pocket (probably the "Snowwalker" style) and a fur ruff. New buttons -- duffle style since that works best with mittens -- is a must as well, and probably hood size adjustment cords.

The other one may end up dyed OG and used as a summer anorak. Again chest pocket, new buttons, and sane cuffs somehow. Greenland wax.

[Dreadhead]

awesome i look forward to seeing those! i know what you mean about the cuffs thats why i cut them off and took out the pleats then sewd on huuuge leather cuffs for wearing big mitts. and with a retention strap to keep them tight when not wearing gloves. it works for me

[martsim73]

I'm worried though that if I cut the cuffs off, my sleeves will be halfway up my forearms. I'm quite broad with a 52" chest but my arms aren't long as others might suggest in relation to the arms of their smocks. I might need to get another smock just to cut up for material to add to the current smock.

The largest I can find (smock that is!) is an xl... Which apparently is what I have. I could do with a XXL really in the pull on smock style. Does anyone know of a stockist for this XXL size? Do they exist at this size?

I've worn it often in its present guise with the cuffs open, and love it.... What would the cost be to get something in the same style to be made in ventile with slightly wider shoulders and cuffs? Could this be a project for someone in the textiles knowhow??? With their obvious popularity on here, is this a design to be developed with our attached mods and a batch produced professionally? Is this even viable or am I just day dreaming?

Your thoughts, help and discussion would be most welcome...

Martin

[Dreadhead]

for a ventile smock i would speak to bilmo-p5 he makes some great clothing. as for your smock, you may need to just sewn on some extra material for your cuffs as you said not much else you could do

[martsim73]

Cheers Dreadhead... I thought that would be the case. Lol.