Flint and Steel fire lighting kits (Dragon's Breath) for sale

[JimN]

Yes please

[Andy2112]

I got mine on Friday when i got home from work.

What a great piece of kit, i got the char cloth and BP glowing within minutes of getting it out of the pouch, didn't do the next step of making fire though as i had not got any other things to make fire.

IMO a great piece of kit. Even my 4 yr old son got a few sparks when he tried it.

many thanks John.

Andy

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
Sold out again!
I must find more steel!

[Leezo]

John, can you send me another 2 of these if possible please. Let me know if you need my address.

[Sniper]

Got mine today and got an ember 3rd strike absolutely delighted John very pleased with it thanks great bit o kit.

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
New Stock Just Made!
15 sets available

[wizzzard]

I'll have one please John.
Mrs Wizzzard will never guess what her Xmas present is this year.

[John Fenna]

PM me with your details and we will talk!

[verloc]

2 please

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
New Stock Just Made!
10 sets available - going fast!

[verloc]

Received mine yesterday John - top notch - had great fun playing with it last night. I forgot my chq book (meant to bring it to work but forgot) so I will pop a chq in the post tomorrow - top job

[John Fenna]

Shameless bump - ideal Xmas prezzies!

[John Fenna]

bump........

[bushyboo]

Hi John
you got any of these left ?

Gordon

[John Fenna]

Yes!
You have PM

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
New Stock Just Made!
5 sets available - going fast

[Wilderbeast]

THESE ARE SUPERB-highly recomended, great value, within 15 minutes of opening I had my ember on the birch polypore......John Payment is on its way!!

[John Fenna]

I thank you !

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

3 sets available - going fast

[bushyboo]

Hi John
got mine yesterday but was to busy playing to post
works a treat
thanks again
Gordon

[Caleb]

If you still have one i would love it

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!

2 sets available - just made some more but they are still going fast!

[Karl5]

PM sent

/ Karl

[John Fenna]

Karl - you have PM back!

[bigbear]

Mine arrived yesterday, lovely looking bit of kit, not had chance to use it yet but wanted to say thanks for such quick service John.

Bigbear

[Caleb]

arrived today and have just had a play - it is great
pouche looks wonderful and quality is great
Thanks

[Jaysurfer]

Have you got any left John?

[John Fenna]

Yup - PM me for further info!

[John Fenna]

Dragons' Breath" (as you all have started calling them) Kits
Basic Flint and Steel Fire Starter Kits



These are proving very popular! And going fast!

Simple, functional and of a design based on archeological finds.Hold one of the pieces of supplied flint in your left hand (if you are left handed) with a sharp edge horizontal and facing away from you (like pointing a knife away from you with the blade on its side with the cutting edge facing right)
Hold a piece of the supplied char cloth on top, about 1mm from the sharp edge, using your thumb, with one or more fingers supporting the flint underneath.
Hold the steel in a pinch grip with one of the long thin edges pointing out.
With a "snapping" wrist actionstrike the steel onto the flint so that it scrapes its length down the flint to scrape off steel shards which are the sparks you want.
The sparks should land on the char cloth and start glowing.
Put the flint and steel down, wrap the charcloth in a tube of the finest slice of birch polypore you can slice off the fungus supplied(or sandwich the charcloth between two or more slivers...)hold this carefully or use the jaws of your leatherman pliers/two twigs, and blow steadily. the polypore should soon burst into flames.
I am confident with a little practice you will get the hang of the technique.
All kits are tested before despatch so I am confident in them working.
If you cannot get it to work I will happily refund your dosh or send you a replacement set.

Comprising a piece of steel, taken from selected High Carbon Steel files and ground smooth on the edges for safe and effective sparking, selected pieces of natural flint, pieces of Charcloth and slices of Birch Polypore Fungus, all contained in one of my size 1 pouches (colours vary) all for the new price of only £7 inc P&P.
(Contains no actual Dragon. Less than 1% fat. Made in an environment that definately contains nuts - me!)
Colours sizes and shapes vary - this photo is of a typical set!
Out of stock until I get more steel - please be patient.....

[Steve13]

PM sent re a set plus a pouch