View Full Version : Fire steels
Having just received a quality fire steel from Jason_01, and managing to make fire with it! (After a somewhat shaky start,
I was wondering if it is possible to make one of my own from 01 steel?
(Sorry if I have missed a tutorial or info on my searches!)
Hi mate, from what I understand there should be no problem making your own from O1 tool steel, the main requirement is high carbon content.
Other than that it is basically a hardened piece of steel bent in a horse shoe shape. I know that making them from old files is quite a popular choice of materials (an old round file would probably be quite good).:)
Good thinking batman!
How hot will it need to be to bent/forge!?!?!
(EDIT: Reading that back, It was nor ment to be as sarcastic as it sounded)
That I can't tell you, it would have to be at least 800 degrees I would of thought, but Espy or one of the guys that does forging would be better to tell you.:)
MartiniDave
27-09-2005, 13:01
Heat it up to cherry red or hotter. Don't keep working it when it looses the redness, but re-heat it first.
Dave
As always sounds simple!!!
Do I need to quench it or let it cool slowly (After the shaping is done)
Quench would be better, it will be very hard after quenching because of the way the carbides will of formed.
Thanks all,
will give this a go and see what happens!
If it is not a complete failure
I will post some pics (For you to laugh at) :D
Some time ago I tried making a firesteel - dismal failure by comparison with one that I bought from the states which sparks on every strike. From my blackpowder shooting days ( the times when englishmen were trusted ) i remember that the way to get a frizzen in a flintlock rifle to shower sparks was to heat it up to cherry red and smother it in case hardening powder. The harder the steel the better the sparks
Some time ago I tried making a firesteel - dismal failure by comparison with one that I bought from the states which sparks on every strike. From my blackpowder shooting days ( the times when englishmen were trusted ) i remember that the way to get a frizzen in a flintlock rifle to shower sparks was to heat it up to cherry red and smother it in case hardening powder. The harder the steel the better the sparks
By a chance co-incidence :rolleyes: my b(r)other left a tub of casenite case hardening powder in my workshop last week having just hardened a friends frizzen. He said, and I quote, "You'll use that.", and I thought, fascetiously, "Aye, and that'll be right!" and lo, and behold :eek: .....it's good stuff after all! :D :cool:
Cheers,
Toddy
Some time ago I tried making a firesteel - dismal failure by comparison with one that I bought from the states which sparks on every strike. From my blackpowder shooting days ( the times when englishmen were trusted ) i remember that the way to get a frizzen in a flintlock rifle to shower sparks was to heat it up to cherry red and smother it in case hardening powder. The harder the steel the better the sparks
:eek: EEEP!!!!!!! :eek:
;) Thanks for the words of confidence!! (LOL) ;)
Well, Casenite is much easier than putting the steel in a tube or box, covering it with carbonaceous material and sealing it; then keeping the box at red heat for a few days...
'Orrible stuff, however. The older case-hardening compounds were cyanide-based; Casenite is a bit safer.
Sorry pignut - didnt mean to put you off. I am NOT the worlds greatest metalworker -- but my Dad once told me this - theres no teacher like experience! God how many times has he been proved right
Sorry pignut - didnt mean to put you off. I am NOT the worlds greatest metalworker -- but my Dad once told me this - theres no teacher like experience! God how many times has he been proved right
No worries! only messing!
Will keep you posted on my attempt!
wentworth
30-09-2005, 13:13
Hi Pignut,
I've tried to contact Jason about ordering a firesteel but have had no responses. Could I ask if you ordered through his site?
They are so beautiful I would love one!
Hi Pignut,
I've tried to contact Jason about ordering a firesteel but have had no responses. Could I ask if you ordered through his site?
They are so beautiful I would love one!
I PM'd him through British blades and sorted the order out that way,
You wont be disapointed!! they are both beautiful and functional!
http://www.jelldragon.com/fire_starter.htm have nice looking fire steels, probably too nice looking for taking out into the wilds.
Hi Pignut,
I've tried to contact Jason about ordering a firesteel but have had no responses. Could I ask if you ordered through his site?
They are so beautiful I would love one!
Hi Wentworth
I havent received any emails from you, not sure whats up with the email link on my site, Ive just tried it and it seems to be working but I'll look into it. You can PM me here or on British Blades or email to jason@jasonbhall.freeserve.co. uk if you want a steel.
Best regards
Infragreen
11-01-2006, 22:14
I think you would like the business side of the striker as hard as possible, as that makes for more sparks.
But this is not good for the handle side, as the steel is very brittle when quenched (before annealing).
There's a trick to it, however.
After finishing the shape of the thing and maybe filing, polishing a bit, pop it in the fire again, getting the whole mass up to a brightish cherry red (I go a little higher, just before any hints of orange colour).
Hold it there for about 30 secs.
If your tongs are long enough, hold the curly ends in the jaws, to protect them from overheating.
Using the same grip, dip the striking face of the striker into water and hold it there (swirling it around a bit for faster cooling) until there's no more red to be seen on the striker.
Now dunk it!
Polish and test with a sharp flint.
Always works for me.
There's some useful info on here (http://www.bushcraftuk.com/community/showthread.php?t=6137)
I just use old files, heat them to bright red for forging then yellow before dropping them into cold water to quench.
Never had a problem.
Infragreen
14-01-2006, 02:30
Just don't drop one of them! Not a firesteel, but I've broken hardened steel by dropping it.
Maybe I'm just the cautious one, heh.
Files are THE steel for firesteels (old carbon-steel), but with careful hardening, you can get spring steel to work too.
Flat springs (from a Skoda) is great for knives, but too soft for strikers.
Coil rear springs (Opel/Vauxhall) work neat for both applications.
Checked your job... Nice! :)