View Full Version : sheath 4 a north star
hello peps this is my first post so be gentle folks :D ok here goes ive recently bought my first dedicated bushcrafter a brk&t northstar im very happy with the knife, how ever i,ve got one of the new patern sheaths which while classy is rubbish at acctually holding on to the blade :eek: which kinda defeats the point ive tried all the usual tricks ie soaking/shrinking but it still a very lose fit ive tried to figure out a secondary retaining method but due to the very deep throated (ooh er) ;) design ive failed misarably :( so the question is can any one else recommend a modification or an alternative sheath prefarably kydex but leathers cool :cool: idealy i,d want to be able to carry the knife baldrick style and have a fire steel holder. im at your tender mercies :)
You'll have to try a deep friction fit sheath (still pouch type).
I haven't got the Northstar, but I have a Fox River which is very similair in both size and shapeI haven't got round to making one for mine yet, but if you look around on here enough you will come across plenty of examples.
I believe that rapidboy has a Northstar perhaps he has made a different sheah for his.
BorderReiver
22-09-2005, 11:59
No help but Welcome to BCUK :)
Hedgehog
22-09-2005, 12:14
Have you thought of the possiblity of glueing a strip/tube of leather inside the throat of the sheath to thicken the walls & grip the knife handle better. I've seen this done before to good effect.
Welcome dude
check out this link out
http://www.bushcraftuk.com/community/showthread.php?t=4977&highlight=north+star
hope it helps
i,ve actully left some papacord down the inside of the sheath which helps but doesnt cure it, thanx 4 the welcome guys
information on making a sheath: sheath tutorial (http://www.bushcraftuk.com/content/articles.php?action=show&showarticle=58)
you should find enough information here to help you, it doesnt cover making a fire steel loop but its not much of a jump once you understand the basic construction
as it happens i think i may of cracked it zdp 189 on b,b has made me a few ideas and i think i may get him to make me a kydex one as im not a big fan of leather when it rains (and in kent it does Frequently!!!!) as im paranoid about rust im a sad over protective loser when it comes to my blades :rolleyes:
You know you'll end up with a scratched blade using Kydex?
Don't worry, I'm just being a git... :D
well we should all stick to our strengths :D :D ;) only joking, besides between using it 4 batoning, and using it on ferro rods and a now former best mate trying to use it as a very sophisticated and exspensive can opener!! :eek: i can live with a few scratches, but rust? sacralidge!
:p
They're there to be used, better that than drawer queens. (Not that I've that much room to talk on that count - but I still claim mine are research :) )
nah im with you on that front its just a shame that the public peception is so bad i used to be able to use my big bowies ad kukris now i have to cary my northstar and a hachet life is cruel :D
Micky, sorry for late response I was bysy with outdoors fair last 10 days.
Are you absolutly certan that you have new pattern sheaths with firesteel loop and tree rivets. We didn't get a single complaint on them, and especialy not that they don't keep blade inside. We made them wery deep, and I used mine for 4 months whole summer, and there isn'a a hint of knife not holding tight in the sheath. If you have corect one it could be that it is made on monday morning, and I will organize a replacment for you..
Handles on some of the North Stars for british market are made thinner because some of the materials wasn't available in apropriate thickness. If that is the case with yours knife, BRKT will replace handles free of charge. What handle material is on your North Star?
Bogdan
This is a picture of my new Northsatr sheath with the older one next to it. I've wet-formed the sheath and so far (touch wood) I haven't had any problems with the knife coming out of sheath..
http://i4.photobucket.com/albums/y101/smarguet/Forums/newsheath1.jpg
As you can see it has the fire-steel loop fitted as standard
Excellent detail in the wet-formed sheath Stevie.
What's your secret?
yeah i had a good few issues with my one, im sure im alone in this, but if you look on british blades i wrote a review on the one zdp-189, made me, its worth a look if you fancy a totally secure bullet proof sheath all you northstar owners :D
Stevie, can you describe your wet forming method.. it looks great, I'd like to do it to mine also. Thanx
Stevie, can you describe your wet forming method.. it looks great, I'd like to do it to mine also. Thanx
Sorry it's taken a while to get back, I was out tof the country working then had to change jobs, then out of the country again and now I'm catching up on things.
I get the leather nice and wet right through. Then with the knife inside the wet sheath I start shaping the leather around it using my fingers. When the shape starts to resemble the knife I use the smooth round end of a plastic modelling knife (you could use the end of the a tooth brush). Don't push too hard as it will score the leather. Keep working the handle in to the leather until it is as tight as you want it. I take the knife out a few times in between just to make sure it's not getting locked in and to dry the blade off.
The sheath is drying out all the time that you are working it but I then leave it to dry naturally (no direct heat) with out the knife in so the air can get inside as well. It usually drys overnight but it can take longer depending on the thickness of the leather and how much water was in it.
I don't leave the knife in until it is completely dry as most of my blades are carbon steel rather than stainless. The sheath will feel slightly cold to touch if it is still damp.
Hope this helps ;)