View Full Version : Blade Cleaning
Just interested to know how you guys clean the tannin and muck off your (previously shiny) knives, i tend to use the sludge that comes from using a 6000 grit stone and a Nagura Stone when i sharpen my knife/knives.
What do you use?
innocent bystander
13-08-2005, 19:12
Pretty much the same .. :)
rapidboy
13-08-2005, 19:24
Do not get distracted when cleaning your blade.
Yesterday I was cleaning my 9" Stromeng with a little Brunox on a rag and looked up to see what the cat was crying at.
When i looked down the red stuff was everywhere and i hadnt felt a thing as it went through the rag and into my thumb :o
Will i never learn :rolleyes:
I use Brunox or WD40 after use and the sludge from a wet stone when im sharpening them.
I dont go mad at cleaning my blades ,i really just oil them as i like the patina carbon gets with use.
rb
Motorbike Man
13-08-2005, 19:25
I don't use wet stones so a little bit of toothpaste or if things are really mucky a bit of solvol autosol metal polishing paste
Josey Wales
13-08-2005, 22:01
Ideal for cleaning the blade is Hob-brite or shiny sinks etc, because they are slightly abrasive just like 6000 grit nagura-sludge thus scraping the grime off.
works well without an adverse effect on the blade,
jdlenton
14-08-2005, 09:50
I use Astonish like the above but 50p a tub form Wilkinson’s :eek: and a green pan scrubber. If the marks are really bad I use 1200 and 1500 wet and dry wet, polish with Autosol and applly a coat of WD40
James
Jif works well (or is it cif now)
I used halfords metal polish to sort out my UKPK after it went missing for a while. I've also used the hand cleaner I have for use after doing work on my bike
WD-40 works pretty good sometimes. I also use Goo-B-Gone or similar product. You just have to find the right solvent. Acetone is also great as well as brake cleaner which you can buy in auto parts stores.
Biddlesby
14-08-2005, 23:27
Yesterday I was cleaning my 9" Stromeng with a little Brunox on a rag and looked up to see what the cat was crying at.
When i looked down the red stuff was everywhere.....
Phew, I thought you'd killed your cat for a moment.
Fenlander's autosol when stropping worked nicely.
I also use Goo-B-Gone
Though that is obviously something that could only exist in the USA! ;)
i use an abracive polish like t-cut or brasso works too these are things that you will have around the house for when its really bad high grade (1500 and up) wet and dry will work followed with a bit of Starkie treatment or toothpaste or the above mentioned! :cool:
always remember that the keen edge is more important than the shiny surface!
Though that is obviously something that could only exist in the USA! ;)
Pretty common stuff around here. They sell it everywhere but it has different names. I looked at one of the bottles I have and it's called GOO GONE. It's the best stuff there is for removing the adhesive left over after a price tag is removed. It does not damange finishes either. I've used it on paper back books after taking the price tag off.
It's sold as Goo B Gone, Goo Gone, Goo Remover, Goof Off and who knows what else. :)
Motorbike Man
15-08-2005, 09:12
Though that is obviously something that could only exist in the USA! ;)
[/QUOTE]
Have you checked out a Lakeland Plastics or Betterware catalogue recently ;)
always remember that the keen edge is more important than the shiny surface!
Very good point, over polishing can take the edge right off of a blade even if you're being careful. Don't ask me how I know :rolleyes:
It's the best stuff there is for removing the adhesive left over after a price tag is removed.
its well known in the Tomtom household that Peanut Butter is by far the best thing for that job :cool:
Very good point, over polishing can take the edge right off of a blade even if you're being careful. Don't ask me how I know :rolleyes:
yeh i have found that tooo ;)
i guess its like all kit, keep it in 'good order' so long as 'goo' on the blade or what ever isnt making it unhygenic :rolleyes: or stopping it working properly.
****** usually works for me. First the blade, and then the rest. Nice mirror finish usually. :)
Motorbike Man
15-08-2005, 10:51
****** usually works for me. First the blade, and then the rest. Nice mirror finish usually. :)
I'm not entirely sure I actually want to know what's behind the asterisks :rolleyes:
Mr_Yarrow
15-08-2005, 12:07
I'm not entirely sure I actually want to know what's behind the asterisks :rolleyes:
Glad Im not the only one he feels worried by what he might be using.
mmm...sticky :eek:
I'll give you a clue. It's made of skin and begins with an "S". :D
Motorbike Man
15-08-2005, 21:34
I'll give you a clue. It's made of skin and begins with an "S". :D
I was right, I didn't want to know :rolleyes: ;)
Newbie's, I promise, it isn't what you think it is. :) ;)
It's sold as Goo B Gone, Goo Gone, Goo Remover, Goof Off and who knows what else. :)
Are those limonene-based cleaners? If so, they're sold as "eco friendly" degreasants in the UK, which is amusing - they're extremely nasty terpenes... :)
Sounds odd but i use Mountain bike chain degreaser as it is made from natural ingredients and eco friendly. Works very well. (Makes your knife blade smell like fruit for a little while too)