View Full Version : Infrared filter?
I have a 1,000,000 hand lamp and was wondering if anyone knows how to make an infrared filter, it would make a wicked companion for my night vision.
I am sure that I have read about this on BCUK or the web somewere, but I will be dammed if I can find it now I want it, story of my life :-P
RAPPLEBY2000
08-01-2005, 11:10
a very expensive item!
try local gun shops particulaly those that make or repair guns, i was looking for one of these once.
companies like maglight may be able to help also you could try petzl or princeton tec.
prehaps even security firms may be able to help they may have filters for security cameras?
hope that helps.
If you're going to stop all of the visible and UV output from a 1 million CP lamp and only let the IR through that filters going to get pretty hot isn't it ?
My 500,000 cp handlamp has a warning about not putting it face down on surfaces etc because of the heat generated by the bulb.
Maybe worth looking for a glass filter as less likely to melt than plastic - but then glass is supposed to reflect infra-red according the theory of greenhouses !
If you have the NV kit already, how about trying some red "gelatine" filters used in theatres etc for coloring stage lights. These are some sort of plastic and fairly heat resistant to cope with stage spotlights using 500, 1,000 even 2,000 watt bulbs. You may not get IR only, but can get fairly strong red's greens and even a dark purple.
Cheers
HI This is not a answer for infrared but i was looking for a colour filter for my lamp in the end a well known diy store beging with F sells glass paint spray available in many colours this work lovely on a 1 mill lamp and if you need to remove it later warm water and a little light rubbing sort the job out. like i said not infrared but does colour great for night time forays with the rifle.
They sell IR filter sheets here:
http://www.alanaecology.com/acatalog/Illuminators.html (bottom on the page)
I have improvised IR filters in the military using two plastic filters (one red, one blue) with a peice of bin liner in between the two, but not on anything that powerfull.
I used to use it on a 3 cell Mag Lite and the light would still throw out to 100 meters plus, stood next to it you could see nothing at all without some form of night veiwing aid.
I have also used wratten filter paper for IR photography on some large flash guns, with this you get a slight glow unless you double it up. The same filter could be used on a lower powered torch than the one you have very adeqautely :wink:
Great Pebble
08-01-2005, 15:19
See if you can dig up some of the filters designed for military vehicle headlights. Surplus dealers would be the place to start.
arctic hobo
08-01-2005, 19:27
According to my knowledge of physics, you will lose loads of the output of that very powerful lamp if you put a filter on it. And if the visible light can't get out, the lamp will overheat in seconds! I have used a 3.5m candlepower light on a yacht and I would not dare put anything in front of that. Good luck! :biggthump
Moonraker
08-01-2005, 21:06
According to my knowledge of physics, you will lose loads of the output of that very powerful lamp if you put a filter on it. And if the visible light can't get out, the lamp will overheat in seconds! I have used a 3.5m candlepower light on a yacht and I would not dare put anything in front of that. Good luck! :biggthump
Stick some sliced bread in front of it when you get hungry hobo :wink:
Why not just pull up to the middle of the field at night, lob a thunderflash into the middle , cover your eyes then pick 'um off like pigs in a barrel :naughty:
arctic hobo
08-01-2005, 21:11
:rolmao: :biggthump
Great Pebble
09-01-2005, 05:08
Vehicle headlights with the filters on are surprisingly effective. The filters do get damn hot though.
This is going really well...keep it coming Im learing loads.
Thank you.
:biggthump