PDA

View Full Version : In field sharpening



Brainflex
18-11-2004, 19:44
What do you use to touch up your blades when out playing?

Adi007
18-11-2004, 19:50
I use a Fallkniven DC 04 ceramic/diamond combo. Small, lightweight, robust and does a good job.
http://www.tregor.co.uk/dc4.html

TheViking
18-11-2004, 19:58
A cheap 5£ two-sided stone. 8 x 3 cm. :-) Depends if it's a long or short trip and what the transport is. If it's canoe, and a long trip, I will perhaps bring it. (also depending on the amount of cutting tools)
If it's a long hiking trip I won't bring it. If it's a short day trip, I will certainly not bring it. :wink:

Andy
18-11-2004, 20:24
I don't have to (don't get enough time to blunt it) If I did need to it would be a small ceramic rod. IMO these are the best if you have the skill to use one

Nightfall
18-11-2004, 20:46
Sharpening board and strop. If not that a small fine and medium grade stone.

RovingArcher
18-11-2004, 21:23
Leather belt for a strop, otherwise, I carry a small sharpener with each ruck or bag that's meant for the knife in the ruck/bag just in case the knife sees a lot of use. Those would be a diamond stick by Gerber, a ceramic rod sharpener by Gatco and an Accusharp. I also added some W/D paper to each.

mal
18-11-2004, 21:59
I plan to get a combination water stone 1000/6000 from axminster tools

Andy
18-11-2004, 22:10
I forgot to mention teh leather belt nad the famous hoodoo hone (do a search for it. It's very good for convex edges)

Adi007
18-11-2004, 22:11
For field work you might be better off with thier combination coarse/fine ceramic stone Mal. Lightweight yet remarkably strong.

Moine
18-11-2004, 22:15
Wet/dry sandpaper (600 grit most of the time). In the palm of my hand it makes a neat convex edge.

Cheers,

David

tenbears10
18-11-2004, 22:23
Mal

The axminster waterstones are great but they are a bit heavy to take out and about. I ended up cutting the last 3 inches of the stone off with a hacksaw. This left enough to use at home and made a small lighter weight field combo stone. It did take a couple of hacksaw blades but they were cheapo from a diy place.

The lightest field sharpener has to be a starkie or just the belt you have with you (sorry jake not wanting to suggest another piece of leather is as good).

Bill

tomtom
18-11-2004, 22:25
i carry a bit of 600 grit wet and dry and a starkie in my PP. :biggthump

mal
18-11-2004, 23:32
cheers for that Adi007 and tenbears10 i will look into both thes ideas
Mal

PaulW
19-11-2004, 09:18
I normally carry a DMT mini sharp, a Gerber diamond pen shape sharpener and a ceramic rod. They take up next to no room and hardly weigh anything.

MartiniDave
19-11-2004, 09:33
In the feild I use a small arkansas stone, the pouch has the legend "official sharpening stone of the boy scouts of america". About 4 x 1 x 1/2 inches. Large face for knives and axes, narrow face for the billhook.

Dave

JakeR
19-11-2004, 11:54
I use the DC4 sharpening stone for sharpening anf then the Starkie (don't click here) for polishing and bringing to absolute razor edge.

Rod
19-11-2004, 11:58
A small Buck diamond stone that has a belt pouch to hone & a stropping board (birch bracket) to polish

cheers

Brainflex
19-11-2004, 18:54
It,s interesting to see everyone's got something differant to do the same job.

JakeR
19-11-2004, 19:09
As long as it removes metal to a certain degree it will work!

bushwacker bob
19-11-2004, 19:32
As long as it removes metal to a certain degree it will work!
It worked a bit too well on your woodlore Jake! removed micarta as well :o):

JakeR
19-11-2004, 20:17
Disappeared in fact :shock:

:wink: