View Full Version : the blade
monkey boy
13-02-2009, 22:16
im gonna try and make a knife, i see there alot of differet types of blades i can use on the attleborough website, most of them which are stainless steel, i was told that carbon steel was a better blade to work with tho. im a little confused, has anyone got any good recomendation on what type of blade i should bye and what it look like.
many thanx monkey
I recently decided to do the same so I bought some ground flat stock from Cromwell Tools and some Thuya Burr for the handle, which turned up today. I'm working on the blade at the moment and hope to have the bevels ground before the weekend is out.
I'd thought about buying a blade and sticking a handle on, but I really wanted the knife to be my own. So far it's working out well and I'm really enjoying the process.
Have you thought about working from scratch?
There is no "right" steel; it depends on what you want.
A stainless of some kind (there are lots) will not usually rust (some will) but will not normally hold such a good edge - it will blunt more quickly. If you go sea fishing or camp in coastal area I would recomend stainless (others will jump in here I am sure :) )
For a really good honed and stropped edge that you could shave with I prefer a reasonable carbon steel. It will hold a better edge but, if not treated properly, will rust and will be more brittle so the blade can snap and the edge can chip. A good knife will have a degree of flexibility in the body and a hard edge. This is achieved by choosing the right steel and applying the right heat treatment (tempering and quenching).
having said all that, I do not make as many knives as others on this forum and I am sure one of the pro's will turn up soon to give you advice (and probably correct me!!)
Making full size models of the blades in card or wood can give you a feel for whether you like the look of the blade, the handle size/shape etc.
wanderingblade
14-02-2009, 20:16
For price you really can't beat Lauri or Polar blades - I've uses many of these and particularly like the forged finish carbon steel blades.
Great price and very good quality blades with nice long tangs so you can choose whether to go for a hidden tang, rivetted tang or 1/2 tang.
Highly recommended. Brisa have a good selection.
Dave Budd
14-02-2009, 22:53
depends on the style of blade that you want, how much you are willing to spend, how much input into the design you want, steel type and blade finish.
You can get some variations and choices from Attleboroughs, brisa, etc. Or you could have a go from scratch. Or you could get somebody to make one to your spec. Or you could go on a course
;) So many ways to skin a knife
The choice is yours as has been said and it comes down to:
What tools you have/can borrow or are willing to buy.
What skills you have or wish to learn
You can go on aknifemaking course (see Dave)
You can make the blade and send it offf for proffessional HT
The list goes on but the main factors are money/resourcefullnes and skill
robin wood
15-02-2009, 10:09
For price you really can't beat Lauri or Polar blades - I've uses many of these and particularly like the forged finish carbon steel blades.
Great price and very good quality blades with nice long tangs so you can choose whether to go for a hidden tang, rivetted tang or 1/2 tang.
Highly recommended. Brisa have a good selection.
I would second that a polar 95 is one of my favourites, cheap but fantastic all round user.
I would second that a polar 95 is one of my favourites, cheap but fantastic all round user.
Thats good to know as I am supposed to handling one for guy.
monkey boy
16-02-2009, 17:49
cool i had a look at the pola it looks very good for the price, but there seems to be more to chose from with the lauri, im gonna stick with the carbon steel, thanx every one for your help