PDA

View Full Version : Bergan and yoke questions


AJB
11-01-2009, 18:28
Hi all, thanks for reading.

I’ve just acquired a bergan and yoke system from andywinkk (Nice guy – thank you), as a present, but I’m thinking I might keep it, as my nephew he informed me last night he’s just bought his own!

I have a few questions if anyone out there knows these inside out...

1 I’m surprised how short they are; presumable the intention is to hang something off the bottom (or is it to deal with wearing a belt with pouches? Not too up on army kit, but it does make the waist strap very high – which is not a problem as it won’t accommodate my lardy proportions). If it is to hang something off the bottom, is there a specific pouch designed for this? OR have I just got one with a short back length, unsuitable for my 6’4”? Do they come in different sizes and how do I tell what I’ve got?

2 There seem to be a load of straps that I don’t understand and seem unnecessary – is there a manual for the sack or instructions online?

3 How does the waist strap work on the yoke? There seems to be two straps one with the male end of a standard clip buckle (what’s the proper name for these?), but the other strap just loops back on itself.

Thanks for looking

Andy
bikething
11-01-2009, 18:36
Try this (http://www.twoeleven.info/files/PLCESidepouch.pdf) from this thread here (http://www.bushcraftuk.com/forum/showthread.php?t=14897) :)
AJB
11-01-2009, 19:02
Brilliant cheers - that explains the yoke waist startp - the clip's missing!
bikething
11-01-2009, 19:14
Brilliant cheers - that explains the yoke waist startp - the clip's missing!
which clip? - the sidelock (quick release) one?
AJB
11-01-2009, 19:17
Half of the clip that is on the yoke waste belt. The male half is there but the female half which should be on the adjustable loop of webbing has gone.

And yes the the sidelock (quick release) one!
bikething
11-01-2009, 19:19
Is it the same size as the one on the loop in the middle of the pocket at the bottom? ;)
AJB
11-01-2009, 19:28
No! It seems to be unique, but although the male part is shorter, it fits into the female side of the clip on the main lid!
bikething
11-01-2009, 19:42
I'm surprised it's a different size/shape - I don't have the 'proper' yoke, but have a yoke off something else that has the clips in the right places.
Has the belt clip been replaced on yours perhaps? - should be easy enough to get a matching pair of clips from somewhere - they don't have to match the other clips, just each other.
AJB
11-01-2009, 19:50
Yep, seems a bit silly to have at least three different sizes that I've counted so far!