View Full Version : Where can I buy bolts like this?
scottishwolf
17-10-2007, 11:48
Excuse the crappy drawing but i cant find a pic of what i want. I'm after some hex or torx headed bolts that are threaded on the 'inside'. It's for bolting knife handle scales together. I can find normal threaded ones everywhere but no internally threaded ones. Can anyone here please point me in the right direction? :rolleyes:
http://usera.imagecave.com/scottishwolf/boltdesign.JPG
scottishwolf
17-10-2007, 11:52
They are the same as these ones
http://usera.imagecave.com/scottishwolf/TKXL03.jpg
I think we have them at some of the bigger DIY stores. If you can't find any in the UK you can pm me and I'll have a look. If I find some I could send them to you. please be sure to give me the exact dimensions.
cheers!
have you tried cromwell?
it might be easier to ring/email than search their catalogue
steve
Bootstrap Bob
17-10-2007, 12:32
SW
You could try here.
http://www.sdproducts.co.uk/furniture.html
But I think they may be a bit large for you.
The alternative is to have a threaded tube between two conventional socket head bolts. Just make sure they don't meet in the middle.
scottishwolf
17-10-2007, 12:34
:confused: Good idea, where would i get internally threaded rod though?
Are these what you are after? it's an American site, may not be any good to you:
http://www.knifekits.com/store/s-pages/kk_store_1mainframe.htm?kk_pro ducts_parts_main.htm~smain
scottishwolf
17-10-2007, 12:39
Thats what i'm after but the shipping makes it a no no, cheers anyway :)
Thats what i'm after but the shipping makes it a no no, cheers anyway :)
or these:http://www.bbnonline.co.uk/online/Browse.aspx?Cat=40209
look at fasteners.
Banjobill
17-10-2007, 13:48
Try Denis at Brisa:
https://www.brisa.fi/portal/index.php?option=com_oscommerc e&osMod=index&cPath=97_100
:)
mr dazzler
17-10-2007, 15:32
Could these be any use?
http://images.google.co.uk/imgres?imgurl=http://www.workshopheaven.com/eStore/media/images/product_category/SAWNUT.jpg&imgrefurl=http://www.workshopheaven.com/eStore/cgi-bin/cp-app.pl%3Fusr%3D51F3282165%26rn d%3D50354%26rrc%3DN%26affl%3D% 26cip%3D%26act%3D%26aff%3D%26p g%3Dcat%26ref%3DKnife%2BMaking %2BSupplies&h=115&w=153&sz=10&hl=en&start=26&um=1&tbnid=KFFlyJScweUb4M:&tbnh=72&tbnw=96&prev=/images%3Fq%3Dsaw%2Bnuts%2B%26s tart%3D20%26ndsp%3D20%26svnum% 3D10%26um%3D1%26hl%3Den%26sa%3 DN
The domed nut's normally are used on panel saw's, I have plenty of old disston and S&J ones, various sizes just like the ones in the link
scottishwolf
17-10-2007, 15:48
Could these be any use?
http://images.google.co.uk/imgres?imgurl=http://www.workshopheaven.com/eStore/media/images/product_category/SAWNUT.jpg&imgrefurl=http://www.workshopheaven.com/eStore/cgi-bin/cp-app.pl%3Fusr%3D51F3282165%26rn d%3D50354%26rrc%3DN%26affl%3D% 26cip%3D%26act%3D%26aff%3D%26p g%3Dcat%26ref%3DKnife%2BMaking %2BSupplies&h=115&w=153&sz=10&hl=en&start=26&um=1&tbnid=KFFlyJScweUb4M:&tbnh=72&tbnw=96&prev=/images%3Fq%3Dsaw%2Bnuts%2B%26s tart%3D20%26ndsp%3D20%26svnum% 3D10%26um%3D1%26hl%3Den%26sa%3 DN
The domed nut's normally are used on panel saw's, I have plenty of old disston and S&J ones, various sizes just like the ones in the link
They are perfect, where can I get them from? :rolleyes:
stuart m
17-10-2007, 17:49
They are perfect, where can I get them from? :rolleyes:
http://www.workshopheaven.com/eStore/cgi-bin/cp-app.pl?usr=51F816345&rnd=2758789&rrc=N&affl=&cip=&act=&aff=&pg=prod&ref=Sawnuts&cat=Knife+Making+Supplies&catstr=HOME:Knife+Making+Suppl ies
:)
Screwfix direct possibly.
scottishwolf
17-10-2007, 18:34
http://www.workshopheaven.com/eStore/cgi-bin/cp-app.pl?usr=51F816345&rnd=2758789&rrc=N&affl=&cip=&act=&aff=&pg=prod&ref=Sawnuts&cat=Knife+Making+Supplies&catstr=HOME:Knife+Making+Suppl ies
:)
Nice one, cheers :D
Scots_Charles_River
17-10-2007, 18:44
BandQ, they are like bed assembly bolts.
Nick
Did you check the shops mentioned in my Knife Handle Material Encyclopedia (it's a sticky in this section)? Maybe doing some price cross-reference? ;)
(not affiliated with any of the shops mentioned in mentioned thread :D)
scottishwolf
18-10-2007, 20:21
BandQ, they are like bed assembly bolts.
Nick
The B&Q ones are far too big, thanks anyway :)
scottishwolf
18-10-2007, 20:22
Did you check the shops mentioned in my Knife Handle Material Encyclopedia (it's a sticky in this section)? Maybe doing some price cross-reference? ;)
(not affiliated with any of the shops mentioned in mentioned thread :D)
Cant seem to find it??? Opps, found it now
Cant seem to find it??? Opps, found it now
:D My fault, s.orry about that. :bandit: Thought this was posted in the sharps 'n shine section :naughty: