View Full Version : Anti-glug spout
Right. I reckon this is the best place for this one. :wink:
I am far too fed up with waiting for jerry cans to empty into the Landy's fuel tank :cry: and need a source of "anti-glug" spouts.
Anyone on here stumbled across any? If you have used one before, which one? and was it any good?
Cheers
Rob
I got one from Halfords that fitted a mil-spec jerry can ... came complete with a rubber nozzle and little filter too. The filter is good but i feel that the rubber nozzle would dissapear into the tank the first time I used it!
Can't you make/modify one? Would have thought it's not too hard.
When a Jerry Can is full hold it side ways to begin with. No glugs then. Careful though it pours very fast. :shock:
Hope this helps.
Having a landy makes you an expert at using a jerry can ... espacially if it's a V8! :-D :-D
When a Jerry Can is full hold it side ways to begin with. No glugs then. Careful though it pours very fast. :shock:
Hope this helps.
hmmm.....I will nip in to the local Halfords and look (although I used to work there and know the markups they offer) :wink:
Will try some of the other local motorfactors.
Tried holding it sideways, but not really ideal. Just want something nice and secure, and easy/quick to use for Mel, where I wont spill it all over the woods :-D
There was a 90 round here with a Hummer engine in. That would put the V8 to shame :-)
Here's a spout Rob ... just like the one I got!
http://www.roof-rack-supplies.co.uk/accessories/jerry-can.htm
Cheers Adi, that looks quite good. Shame about the £6 P&P (these people are having a laugh).
I know some people down that way, might be able to get them to pick one up.
How long (ish) does it take to empty the Jerry?
What would that have been, 6 litre? :shock: I'd love to have seen that!!!! :-D Or drive it!! :o): :o): :o):
There was a 90 round here with a Hummer engine in. That would put the V8 to shame :-)
Couldn't tell you - I'll time it next time! :-D
How long (ish) does it take to empty the Jerry?
I put a spout on my Jerry Can, it took forever to empty the can and leaked all over the place. Binned it, its easier without one.
I altered the spout on a jerry can - jubilee clipped some fuel pipe on to it about an inch wide by five feet long.
Now to fill the pickup I fasten the spout on, stick the pipe in to the fuel filler, lift the jerry can on to the roof and leave it to get on with it.
No fuel spilled on me, no aching back from lifting full jerry cans, no fuel spilled down the side of the pickup, no hassle.
I got the jerry cans and spout from Anchor Supplies- www.anchorsupplies.com and the fuel hose from an industrial supplier in Inverness - HIS.
George
try machine mart they sell can and spouts.
Hummer engine was a 6L. It was put into a 90, and was for sale last year for £6500. :biggthump
Certainly something different. Bet it made the ground shake as it went :-)
Cant have it going on the roof if Mel is involved (not unless we pack a ladder) :lol:
6L ... what's he get, 4 - 7 mpg? :shock: :shock:
Spares for that engine would be fun to find (and pay for :shock: !)
Hummer engine was a 6L. It was put into a 90, and was for sale last year for £6500. :biggthump
Probably somewhere about that mpg. :lol:
Reckon it would kick butt at an off road day 8-)
I'd love to know what mods were made to get that kinda engine in a 90 ...
Probably somewhere about that mpg. :lol:
Reckon it would kick butt at an off road day 8-)
The 6l diesel engine in the Hummer is the standard GMC engine they use in a variety of SUV/pick ups.
The can be put in to a Defender fairly easily - conversion plates for clutch, gear box are easily available. It recogmended to put an auto box (ZS 4 speed Ranger Rover OK) as the torque tends to through manual gear boxs all over the place.
MGP is suprisingly high, better than the Landy V8 petrol - mostly due to the fact that on the road the engine is running under very little strain.
Keith_Beef
18-02-2004, 14:23
The 6l diesel engine in the Hummer is the standard GMC engine they use in a variety of SUV/pick ups.
The can be put in to a Defender fairly easily - conversion plates for clutch, gear box are easily available. It recogmended to put an auto box (ZS 4 speed Ranger Rover OK) as the torque tends to through manual gear boxs all over the place.
MGP is suprisingly high, better than the Landy V8 petrol - mostly due to the fact that on the road the engine is running under very little strain.
My ambition is to fit a Perkins 6 cylinder 6 litre diesel into a Defender or Range Rover. I'd guess at around 35 mpg. I've read a few posts about being able to tow a boat, without noticing that it's there; really strong torque.
Manual gearbox, but pulling from such low revs, that (supposedly) once you've pulled away, you tend to just stick it in fourth or fifth, and drive like an auto... I'd love to try one, to see if it's true.
Keith.
MartiniDave
18-02-2004, 14:30
Keith,
What your looking for is actually my '76 series 3, 2 1/4 petrol SWB..... I wish :lol: :lol: :lol:
Dave
better bet is go for the Power Torque 2.8TDi.
This is basically a re worked 300TDi engine that fits straight in. Land Rover themselves are usingthem on some export vehicles.
That could be a fun project one day!!! :-D
The 6l diesel engine in the Hummer is the standard GMC engine they use in a variety of SUV/pick ups.
The can be put in to a Defender fairly easily - conversion plates for clutch, gear box are easily available. It recogmended to put an auto box (ZS 4 speed Ranger Rover OK) as the torque tends to through manual gear boxs all over the place.
MGP is suprisingly high, better than the Landy V8 petrol - mostly due to the fact that on the road the engine is running under very little strain.
A V8 isn't very different actually ... once you are away you can tend to stick it into a higher grea and stay there until you hit hills.
But the Perkins 6 would be another nice engine to have in a Landy!
Having said that, the V8 is a nice engine too!
Manual gearbox, but pulling from such low revs, that (supposedly) once you've pulled away, you tend to just stick it in fourth or fifth, and drive like an auto... I'd love to try one, to see if it's true.
Ok, now I can post again :-)
Got one on the spoust from Halfords. £8.99 and does the job I need it to. It was a pleasure emptying a 25L can in to it before my arms get tired :wink:
Only thing I had to do was smack the locking mechanism about a bit to narrow the width between the hooks - but smaking it usually fixes most things Land Rover related :lol:
Cheers guys.
Wasn't a hammer standard issue in the Landy toolkit? If not, it should have been! :lol: