Search results

Hi. This is a Nessmuk I made and was commissioned by a chap on BB. It's 4mm 01 and about 5 1/2'' in the blade. OAL is about 10 1/2''. The grind is a high (ish) Scandi with a secondary bevel. Scales are stabilised Maple with red fibre liners. Fittings are 4mm diameter s/steel pins and 6mm dia...

Hi. I recently finished this one and would like to show it. It's about 3 3/4'' in the blade. Steel is 3mm 01 with a Sabre grind and secondary bevel. The scales are black Linen Micarta with red fibre liners. There's three 6mm diameter stainless steel tubes as fixings. Thanks for looking. Adam

Hi. I've just finished making this one for Chris the Cat over on BB. It's about 4 1/2'' in the blade and 4mm 01. The scale are green canvas Micarta on white liners. Pins are 4mm s/steel and lanyard tube is 6mm s/steel. Thanks for looking and comments welcome. Cheers Adam

Hi. This is a Wharncliffe style I just made for Big Rick on BB. It's about 8'' overall. Steel is 3mm 01 with a flat grind and secondary bevel. The scales are black linen Micarta with red liners and stainless pins. Thanks for looking. Adam

Just finished this one and thought I'd put it up for a look. It's made of 4mm 01, is Sabre ground with a secondary bevel. The scales are maroon Linen Micarta with white fibre liners. Fittings are stainless steel. OAL is approx. 8''. Thanks for looking. Adam

Hi. Just finished this one. It's 4mm 01 with Sabre grind and secondary bevel. The scales are red G10 with black fibre liners. The pins and tube are 4mm and 6mm s/steel respectively. OAL is approx. 8 1/2''. I made the sheath too. Thanks for looking. Adam

Hi folks this is a blade I've just finished. It's about 8 1/2'' overall. 4mm 01 with a Sabre grind and secondary bevel. Will post pics when it's handled. Thanks for looking. cheers Adam

Hi, this is a commissioned knife for Big Rick over on BB, who wanted a Nessie style blade with a handle like that of a hunter he'd just had from me. The steel is 3mm thick 01 and the grind is Sabre with a secondary bevel. The scales are green Canvas Micarta that was rubbed to 400 grit and then...

Hi folks. Thought I'd show my latest creation. It's a 4'' bladed hunter / utility out of 4mm 01. Scales are green canvas Micarta with black liners. Pins & tube are s/steel. Thanks for looking.

This is one I've just finished. It's 4mm 01 and flat ground. Blade length is approx. 3 1/2''. The scales are Micarta finished to 240 grit for a nice grippy feel. Were originally buffed but didn't like the feel or the look. There's also black fibre liners and the fittings are 6mm aluminum...

Hi. This is a Hunter I've just finished. It's out of 4mm 1080 Carbon steel with a full flat grind and secondary bevel. The scales are Ivory Micarta with black fibre liners. OAL is approx. 7 3/4'' . Edge length approx. 3''. Hope you like and thanks for looking. cheers Adam

Hi, this is a knife I've just made. Its 4mm 01, flat ground and about 8 1/2'' overall. The scales are Ivory Linen Micarta with black liners. Two Brass pins and a Brass thong tube. Thanks for looking.

This is a Camp knife I've just finished making for a customer. Blade is approx. 6 3/4'' long; 40mm wide. 5mm 01. Heat treat very kindly arranged by Stuart Mitchell. Scales are Sambar w/ black liners. Stainless Loveless bolts & 8mm Aluminium lanyard tube. Thanks for looking.

This is more of a general purpose / skinning knife. Influenced by the Marble's Woodcraft. It's 5mm 01 with a Brass guard, Buffalo horn spacer and Stag crown handle. Comments ?? Thanks a lot.

Getting a bit ahead of meself. Already posted and haven't introduced yet - my apologies. Some really good stuff on here - can't wait to get into it. Hello from Chevin

Hi, this is my first post. This is a knife I made out of 4mm 1080. Range hardened by Dave Budd (RC59 / 60 on cutting edge.) The blade is approx. 3 3/4 '' long. Scales are Sambar on red fibre liners. 4 Brass pins & Epoxy secure everything. Sheath also made by me. Hope you like it and would...